Pg. 28
Doc ID: 191-7803A
Doc Rev: 011918
·
Oil recommendations can also be viewed under Tech
Tips on our website at
www.rekluse.com/support/videos/atv-mc-support-videos
.
·
Inspect all of your clutch parts for signs of wear or
excessive heat, and replace components as necessary.
Clutch wear is dependent on the riders use.
Maintenance Protocol
Maintenance
Intervals
Check and verify Free Play Gain
Every ride
Inspect all clutch parts for excessive
wear or heat. Replace as needed.
Refer to OE
service manual
Change oil, inspect and clean oil screen
Refer to OE
service manual
·
Measuring the clutch
pack and/or the EXP
disk can help
determine if the
components need
replacing. See the
Setup Sheet for the
specific clutch pack
measurements.
·
Inspect the dampers, and replace them if you feel any
movement between the two hubs. Refer to the section on
inspecting the dampers for more information.
·
Maintain adequate Free Play Gain. Check before every
ride and adjust if necessary.
·
Repeat the break-in procedure anytime you replace the
EXP bases, Teflon pads, EXP wedges, or frictions disks.
