Pg. 8
Doc ID: 191-7803A
Doc Rev: 011918
Note:
When seated in the basket, the sleeves may stick
slightly above or below flush with the top of the basket. This
is normal.
Notes for Clutch Pack Installation:
·
The clutch pack will be replaced with all new frictions and
steel drive plates. Do not reuse the old clutch pack.
·
Some friction disks are marked with a small colored dot.
This mark is used for processing and can be ignored.
·
The orientation of the clutch pack is different for each bike.
The number and thickness of drive plates included in the
kit also varies by bike. Please refer to the
Setup Sheet
for
specific information before installing the clutch pack.
Install all the basket sleeves
