Pg. 10
Doc ID: 191-7803A
Doc Rev: 011918
1. Add a light film of oil between the lining plate and pressure
plate (this will help the plates stick together for ease of
installation).
2. Place the new steel lining plate onto the Rekluse pressure
plate by lining up the index tabs and slots. Do not reuse
the old lining plate.
3. Install the pressure plate subassembly.
4. Place the pressure plate springs into the assembled
clutch, then insert the screw sleeves into the springs. See
the following chart for spring information.
PRESSURE PLATE INSTALLATION
