REITER Respiro R9 profi, Руководство по эксплуатации

Страница: 60 / 74

56
2.
Disassemble the plastic cover (1) in driving direction right in the area of the conveyor
belt
2.1 Removal of the labyrinth bar (2) on both sides
2.2 Removal of the labyrinth bar (1) on the front of the conveyor belt including transition strip (2) to
the pick-up.
2.3 Flange bearing on right at front (1) and rear (2): Loosen screws
Release fine adjustment at front and rear. Loosen screw (3) only slightly. No need to counter hold the
nut. Remove screws (4).
In the same manner, also loosen and remove the screws on the front of the belt.
1)
2)
2)
1)
3)
4)
1)
2)