REITER Respiro R9 profi, Руководство по эксплуатации

Страница: 44 / 74

40
5.5.5. Keyboard functions row 5:
By pressing and holding this button for approx. 3 sec, all valves close immediately
By holding down the "!" Key, valves are released again
ATTENTION: When the PTO shaft is running, the axial piston pumps are permanently
pumping against the closed system => oil flows back into the tank via the pressure relief
valve => oil heater!
Important: After pressing the "STOP" button, switch off PTO shaft promptly!
Holding down this button will automatically bring both units of work into transport position
Keep the button pressed until the program has been completed and lock the working units in
transport position in the hook (see chapter automatic flap). If the folding process is
interrupted by mistake, press the button again and the folding cycle will be repeated.
Holding down this button will automatically bring both units of work into working position
Keep the key depressed until the program has been completed and the working units are in
the headland position (see chapter automatic folding)
Button without function