REITER Respiro R9 profi, Руководство по эксплуатации

Страница: 73 / 74

69
6. For the forage harvester, the swaths should be laid side by side. This allows the chopper to
achieve the best throughput.
7. For sensitive crops such as alfalfa, etc. reduce the system speeds to minimize leaf and
disintegration losses.
8. Be sure to use the lowering limit for the working units when turning grain straw. This
reduces wear.
9. For the use of maize straw, the working units are to be led just above the ground so that
an optimal compromise between the quality of the harvest and the cleanliness of the
harvested crop is achieved.
10. The headland should be cleared at least 10m - so the crop is no longer run over when
turning.
11. The following diagram shows the rapid start-up at the swath at the headland. In doing so,
we shift the crop on the windrow when approaching to the middle of the field and "drag it
out" when driving out into the headland.
Advantage: there are no crop accumulations despite cross swathing on the headland.
Headland swathed
up to 13m