REITER Respiro R9 profi, Руководство по эксплуатации

Страница: 28 / 74

24
4.2.4. Connecting the brake lines and
lighting cables
First attach the yellow coupling (brake and control line),
then the red coupling to the tractor. When
disconnecting the machine, first disconnect the red
coupling, then the yellow one.
If the brake hoses are not connected to the brake
system of the tractor, the brakes of the machine are
automatically actuated.
Finally connect the 7-pin cable and check if the lighting
works.
The cable may be damaged by improper mounting or
fastening.
Mechanical stress on the cable may lead to damage.
The cable must not be strained during the lifting and
lowering of the front linkage or during steering operations.
4.3. Placing of the machine
Place the machine only on level and horizontal surfaces.
The machine should preferably be parked in transport position.
1. Put the tractor and machine in an extended position
2. Lift the lower link and put the supporting legs down.
3. Put the control units into floating position and turn off the
tractor engine.
4. Disconnect the brake lines, hydraulic hoses and main cable.
Remove the main cable from the drawbar and store it in a
dry place.
5. Place the sealed hoses in the designated attachment.
6. Remove the PTO shaft
7. Open the lower link hook and lower the hydraulics