Description of the device
Servitec 35-120 with Touch controller — 06.07.2016 - Rev. B
English — 17
4.5
Scope of delivery
The scope of delivery is described in the shipping document and the content is shown on the packaging.
Immediately after receipt of the goods, please check the shipment for completeness and damage. Please notify us immediately of any
transport damage.
Basic degassing equipment:
•
Device controller.
•
"DV" degassing valve, box-packaged.
•
Plastic sleeve with operating manual and electric wiring diagram (attached to the device).
The device is pre-assembled and shipped on a pallet.
4.6
Optional equipment and accessories
The following optional equipment and accessories are available for this device:
•
Fillset or Fillset Compact for make-up with water.
– Fillset or Fillset Compact with integrated system separator, water meter, dirt trap, and locking mechanisms for the "WC" make-
up line.
•
Fillsoft/Fillsoft zero for softening/desalinating the make-up water from the public water network.
– Fillsoft/Fillsoft zero is installed between Fillset and the device. The device controller evaluates the make-up quantities and
signals a required replacement of the softening and desalination cartridges.
•
Enhancements for the device controller.
– Use the RS-485 interface to retrieve various data from the controller and to communicate with control centres or other devices
see chapter 6.5.3 "RS-485 interface" on page 35 .. You need the following items for the communication of the RS-485 interface
with control centres or other devices:
•
Bus modules for the communication with control centres.
•
Lonworks Digital.
•
Lonworks.
•
Profibus-DP.
•
Ethernet.
•
I/O module for standard communication.
•
Modbus RTU
•
Gas discharge measurement for an optimised degassing operation.
Note!
Separate operating instructions are supplied with accessories.
