Reely HT-6 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 72

background image

6

5. Scope of Delivery

•  Remote control transmitter
•  Remote control receiver
•  Binding plug
•  Operating instructions

6. Safety Information

In case of damage caused by non-compliance with these operating instructions, the warranty/gua-

rantee will expire. We do not assume any liability for consequential damage!

We do not assume any liability for property damage and personal injury caused by improper use or

non-compliance with the safety instructions! In such cases the warranty/guarantee is voided.

Normal wear and tear in operation and damage due to accidents (like the receiver aerial being torn off, the

receiver casing broken etc.) are excluded from the warranty.

Dear customer, these safety instructions are not only for the protection of the product but also for your own

safety and that of other people. Therefore, read this chapter very carefully before taking the product into

operation!

a) General Information

•  The unauthorised conversion and/or modification of the product is prohibited for safety and approval reasons (CE).
•  This product is not a toy and not suitable for children under 14 years of age.
•  The product must not get damp or wet.
•  Taking out private liability insurance is recommended. If you already have one, get some information on whether or

not the operation of a radio-operated model is covered by your insurance.

• Do not connect the drive motor to electric models before the receiver system has been installed completely. This

ensures that the drive motor does not start unintentionally.

• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Please check the functional safety of your model and of the remote control system each time before you use the

model. Watch out for visible damage such as defective plug connections or damaged cables. All movable parts on

the model have to be running smoothly. However, there must be no tolerance or ‚play‘ in the bearing.

• The operation and handling of RC models must be learned! If you have never controlled such a model, start espe

-

cially carefully to get used to how it responds to the remote commands. Do be patient!

• Should questions arise that are not answered with the help of this operating manual, contact us (contact information,

see chapter 1) or another expert.

«
...
4
5
6
7
8
...
»

Содержание HT-6









































































Отзывы:

Нет отзывов

Похожие инструкции для HT-6

Бренд: VADDIO Страницы: 2

Бренд: Camozzi Страницы: 33

Бренд: Camozzi Страницы: 2

Бренд: Camozzi Страницы: 64

Бренд: FAAC Страницы: 60

Бренд: FAAC Страницы: 12

Бренд: FAAC Страницы: 44

Бренд: FAAC Страницы: 44

Бренд: FAAC Страницы: 8

Бренд: FAAC Страницы: 60

Бренд: FAAC Страницы: 14

Бренд: FAAC Страницы: 68

Бренд: FAAC Страницы: 16

Бренд: M-Audio Страницы: 26

Бренд: M Climate Страницы: 12

Бренд: Parker Страницы: 12

Бренд: We Care Solar Страницы: 46

Бренд: Watts Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды