Reely HT-6, Руководство пользователя

Страница: 42 / 72

42
c) Servo Control/Test „Display“
In this menu you can graphically display the servo control settings for all 6 channels and simultaneously check the
individual control functions with all mixers. Especially with helicopter models you can easily very quickly make mixer
errors for swash plate control. The servos can be tested as well in this programme. For this, all six channels are
automatically run from one end stop to the other and back.
Display servo control:
• Switch on the transmitter and call the function setting menu.
• Move the cursor arrow to the menu item „Display“ with the two
buttons „UP“ and „DOWN“.
• Briefly push the button „OK“ to activate the menu item.
The display shows the 6 channels in the current position of the
encoders.
If you move the control sticks, activated switches or rotating
encoders in different directions now, you will see precisely
which servo is controlled in which direction.
• Push and hold the button „CANCEL“ to start the servo test.
The six bar displays now continually run from one end stop to
the other. With the receiver activated, the servos react accor-
ding to the bar charts.
• Push the button „OK“ to terminate the servo test. The display
then shows the function setup menu again.
• Push the button „CANCEL“ repeatedly until you get back to
the operating display.
Figure 37