background image

PELLET STOVES 

Chapter 1

red

 

INSTALLATION AND USE MANUAL 

page

 6  

 

Warnings and guarantee conciliations 

              Technical service - Rights reserved  - Reproduction prohibited

 

 

1. 

WARNINGS AND GUARANTEE CONDITIONS 

1.1.  

SAFETY INSTRUCTIONS 

 

 

Installation of the stove, making the electrical 

connections, checking its operation, and 

maintenance are all tasks which should be carried 

out by qualified and authorised personnel.

 

 

Install the stove in accordance with the 

regulations in force in your local area, region and 

country.

 

 

This apparatus cannot be used by people 

(including children with limited physical, 

sensorial or mental abilities or with little 

experience and know-how unless they have been 

viewed or instructed on the use of the apparatus 

by the person responsible for its safety. 

 

For the correct use of the stove and of the electronic 

apparatus connected to it, and to prevent accidents, the 

instructions given in this booklet must always be 

followed.  

 

Use, adjustment and programming must be carried out 

by adults. Errors or incorrect settings may cause 

hazardous conditions and/or poor operation. 

 

Before beginning any operation, the user, or whoever is 

preparing to operate on the stove, must have read and 

understood the entire contents of this instruction 

booklet. 

 

The stove is to be used only for its intended purpose. 

Any other use is to be considered improper and 

therefore hazardous. 

 

Do not use the stove for standing on or as any kind of 

support. 

 

Do not put clothes to dry on the stove Any clothes 

hangers and suchlike must be kept a suitable distance 

from the stove.  

Danger of fire.

 

 

The user is fully liable for improper use of the product, 

thus releasing the company from all civil or penal 

liabilities. 

 

Any tampering or replacement that is unauthorised or 

not using original spare parts for the stove could be 

hazardous to the user and releases the company from 

any civil or penal liability.  

 

Most of the surfaces of the stove are extremely hot (the 

door, the handle, the glass, smoke discharge pipes etc.). 

Avoid coming into contact with these parts, therefore, 

without adequate protective clothing or suitable 

implements, such as gloves with thermal protection or 

implements which keep the hands cool. 

 

It is forbidden to operate the stove with the door 

open, the glass broken or with the pellet loading 

door open.

 

 

Do not touch the stove with wet hands, in view of the 

fact that it is an electrical appliance. Always disconnect 

Содержание Dalia Oyster













































Отзывы: