RED Dalia Oyster, Руководство по эксплуатации и обслуживанию

Страница: 28 / 44

PELLET STOVES Chapter 4
red
INSTALLATION AND USE MANUAL
page
28
Operation Technical service - Rights reserved - Reproduction prohibited
4.9.
CHOOSING THE TYPE OF PELLET LOAD (Key E)
This operation allows the user to set the stove in the best way based
on the type of pellet available.
This prevents fuel waste, ensures expected heating ability and protects
the condition of the product.
Depending on the characteristics shown below (shape/colour/ nature of
flame) and user's experience (grate too full or too empty) it is possible
to use key E , respect to the factory default (0), to increase or decrease
pellet load.
THE CHOICE OF LOAD TYPE (0 factory
default, -1/-2/+1/+2) CAN BE MADE ON
FIRST INSTALLATION OR EVERY TIME IT
IS NECESSARY.
(E.g. when you change supplier or
when you notice differences in colour or size of the
pellets)
4.10.
SUCTION UNIT SPEED SELECTION
In the installation proves difficult for smoke discharge (lack of draught
or even pressure in the conduit), it is possible to increase the smoke
and ash exhaust speed. Such modification is also the best way to solve
all potential problems of pellet blockages in the grate and sediments on
the bottom of the grate which are created by bad quality fuel or which
release a lot of ash.
Press keys D and E simultaneously for a few seconds until LED 0 begins
to flash: now use key E to increase or decrease the suction unit speed
setting:

LED -2 = -20%

LED -1 = -10%

LED 0 = default

LED +1 = +8%

LED +2 = +15%