RED Dalia Oyster, Руководство по эксплуатации и обслуживанию

Страница: 30 / 44

PELLET STOVES Chapter 4
red
INSTALLATION AND USE MANUAL
page
30
Operation Technical service - Rights reserved - Reproduction prohibited
4.12.
Connection to a room thermostat
The room thermostat is not included with the stove
and it must be installed by a specialised technician.
WARNING!
The electrical wires must not be in contact with the
hot parts of the stove.
The stove can also be connected to a room thermostat. The procedure
to follow for the connection of the external thermostat is the following:
 Connect the two wires of the cable which come from the room
temperature to the two free terminals of the connector
( position 13 wiring diagram chap.7). To do this it is
necessary to:
o
unscrew the protective cap of the probe
o
Pass the two wires through the protective cap and
insert them into the hole together with the probe.
o
Pull the two wires to carry out connection to the board
corresponding to terminal 13 (see chap.7)
o
Close the protective cap again.
4.13.
Accessing the motherboard
Perform the following operations working behind the stove:
 remove the four screws X
 remove the cover U

remove the two screws Y
 remove the cover U
 remove the motherboard S
Make the connections to the card and replace the covers V and U
.
PROBE