RED Dalia Oyster, Руководство по эксплуатации и обслуживанию

Страница: 21 / 44

PELLET STOVES Chapter 3
red
INSTALLATION AND USE MANUAL
page
21
Installation and assembly Technical service - Rights reserved - Reproduction prohibited
3.3.
LATERAL CLADDING ASSEMBLY
Installation of steel sides (DALIA)
Take the side “C” (make sure the underside slots into pin “D” ) and
secure it to the top sheet of the stove using the two screws “E and F”
provided.
At the rear, the side should be secured to the structure using the screw
“G” .
Repeat the same operation for both sides. Now raise the cover “A”
and position the steel top “B”.
B
A
C C
E
F
C G
3.4.
MAKING THE ELECTRICAL CONNECTIONS
Connect the supply cable first at the rear of the stove and then to an
electrical outlet on the wall.
The main switch located on the rear of the stove should be switched on
only when you want to light the stove.
If you do not intend to use the stove, it is advisable
to keep it switched off.
Figure 3 - DALIA stove sides
Electrical connection of the stove