RED COMPACT 35 Easy Clean Скачать руководство пользователя страница 9

Страница: 9 / 76

1-WARNINGS AND WARRANTY CONDITIONS

SPARE PARTS

In the event of a malfunction, consult the retailer who will forward the call to the Technical Assistance Service.

Use only original spare parts. The retailer or service centre can provide all necessary information regarding spare parts.

We do not recommend waiting for the parts to be worn before having them replaced. It is important to perform regular maintenance.

The company declines all liability if the product and any other accessory is used improperly or modified without

authorisation.

All parts must be replaced with original spare parts.

WARNINGS FOR THE CORRECT DISPOSAL OF THE PRODUCT.

The owner is the sole party responsible for demolishing and disposing of the product. This must be performed in compliance with laws

related to safety and environmental protection in force in his/her country.

At the end of its working life, the product must not be disposed of as urban waste.

It must be taken to a special differentiated waste collection centre set up by the local authorities or to a retailer that provides this service.

Separating and recycling prevents potential negative effects on the environment and health (often caused by inappropriately disposing of

product parts). It also allows materials to be recovered in order to obtain significant savings in energy and resources.

The requirements in this section relate to the provisions of the Italian standard of installation UNI 10683. In any case, always observe the

domestic rules in force.

Содержание COMPACT 35 Easy Clean













































































Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды

RED COMPACT 35 Easy Clean, Руководство по установке

Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды