RED COMPACT 35 Easy Clean Скачать руководство пользователя страница 45

Страница: 45 / 76

< Auto Eco >

12-MENU ENTRIES AND OPERATION

e - External thermostat

EXTERNAL THERMOSTAT (not included with the boiler, it must be provided by the user)

The temperature of the boiler can also be controlled by an external thermostat in the room. It should be positioned centrally in the room

where the boiler is installed. It provides a closer match between the heating temperature requested of the boiler and the actual room

temperature it provides.

Connect the wires of the external thermostat to points 1-2 of the terminal block on the boiler.

Once the thermostat has been connected it needs to be enabled.

Use key 5 to go to the settings menu and select the EXTERNAL THERMOSTAT option. Confirm with key 5 and then with keys “b” (arrows) you

can activate or deactivate the function. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

f - Auto-Eco activation

If the Auto-Eco option is active (i.e. it is ON), the boiler turns off if there is no demand for heat. If the Auto-Eco function is not active (i.e. it

is OFF), the boiler sets itself to the minimum value if there is no demand for heat (i.e. in P1 power).

Use key 5 to go to the settings menu and select the Auto-Eco option. Confirm with key 5 and then with keys “b” (arrows) you can activate

or deactivate the function. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

g - Eco Stop T

If Auto-Eco is active (ON), the “Eco Stop t” represents the time between the lack of demand and when the boiler actually turns off.

Use key 5 to go to the settings menu and select the Eco Stop t option. Confirm with key 5 and then with keys “b” (arrows), enter the

minutes for the shut-down. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

< Ext.Thermostat >

Off

< Ext.Thermostat >

Off

< Off Time Eco >

03’

< Off Time Eco >

Содержание COMPACT 35 Easy Clean













































































Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды

RED COMPACT 35 Easy Clean, Руководство по установке

Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды