RED COMPACT 35 Easy Clean Скачать руководство пользователя страница 4

Страница: 4 / 76

1-WARNINGS AND WARRANTY CONDITIONS

SAFETY PRECAUTIONS

•

Installation, electrical connection, function test and maintenance

must only be carried out by authorised and qualified personnel.

•

Install the product in accordance with all local and national legislation

and regulations in force in the region or state.

•

A bad use or unproper maintainance of the product can bring to a

serious risk of explosion in the combustion chamber.

• Only use the fuel recommended by the manufacturer. The product must not be

used as an incinerator.

• It is strictly forbidden to use alcohol, petrol, liquid fuel for lanterns, diesel, bio-

ethanol, fluids for lighting charcoal or similar liquids to light/rekindle the flame

in these devices. Keep these flammable liquids well away from the appliance

when in use.

• Do not put any fuel other than wood pellets in the hopper.

• The instructions provided in this manual must always be complied with to

ensure the product and any electronic appliances connected to it are used

correctly and accidents are prevented.

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• The user, or whoever is operating the product, must read and fully understand

the contents of this installation guide before performing any operation. Errors

or incorrect settings can cause hazardous conditions and/or poor operation.

• Do not climb on or lean on the product.

• Do not put linen on the product to dry. Any drying racks or similar objects must

be kept at a safe distance from the product.

Fire hazard.

Содержание COMPACT 35 Easy Clean













































































Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды

RED COMPACT 35 Easy Clean, Руководство по установке

Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды