RED COMPACT 35 Easy Clean Скачать руководство пользователя страница 48

Страница: 48 / 76

12-MENU ENTRIES AND OPERATION

Use key 5 to go to the settings menu and select the Smoke Var.rpm option. Confirm with key 5 and then with keys “b” (arrows) you can

increase or reduce the %. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

l - Maximum power (only for experienced users)

Allows you to set the maximum power limit of the flames which the boiler can use to reach the set target temperature.

Use key 5 to go to the settings menu and select the Maximum power option. Confirm with key 5 and then with keys “b” (arrows) you can

change the power value from 01 to 05. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

m - Component test (only when boiler is off).

This can be done only when the boiler is off and allows you to select the components to be tested:

• Spark plug:

it is turned on for a fixed test period during which the panel displays the countdown in seconds.

• Feed screw:

it is powered for a fixed test period during which the panel displays the countdown in seconds.

• Smoke extractor

: it is activated at 2500 rpm for a fixed test period during which the panel displays the countdown in seconds.

• Exchanger (test not available for the boiler)

: enables you to conduct the test in V5 for a fixed test period of 1 minute during

which the panel displays the countdown in seconds.

• Pump:

it is activated for a fixed period of 10 seconds during which the panel displays the countdown.

• 3-way valve

: the 3-way valve is activated for a fixed test period of 1 minute during which the panel displays the countdown in

seconds.

Use key 5 to go to the settings menu and select the Component test option. Confirm with key 5 and then with keys “b” (arrows) you can

select the test you want to carry out. Key 5 is used to confirm, while key 8 is used to go back to the main screen.

< Maximum Power >

< Components Test >

Feed screw

< Components Test >

3-way valve

< Smoke Fan rpm >

10%

< Smoke Fan rpm >

00%

Содержание COMPACT 35 Easy Clean













































































Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды

RED COMPACT 35 Easy Clean, Руководство по установке

Результаты поиска

Содержание COMPACT 35 Easy Clean

Отзывы:

Похожие инструкции для COMPACT 35 Easy Clean

Бренды по названию

Популярные бренды