C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
4 6
RED 3-AXIS SYSTEM OPERATION GUIDE
CHAPTER 5:
LENS CONTROL MOTOR
RED LENS CONTROL MOTOR OVERVIEW
The RED
®
Lens Control Motor delivers precision control and flexibility in a slim, lightweight design. The RED Lens
Control Motor features dual-sided dovetail rails, a tool-free mounting clamp, and a rotating 7-pin LEMO
®
connector
for space-saving low profile configuration. It is also engineered with mounting options for 15mm or 19mm support
rods, and a magnetic-locking gear system to accommodate a wide variety of lenses.
The RED Lens Control Motor is also compatible with third-party motor drivers using the appropriate RED motor cable
with the proper resistance identification. For more information, visit the
at
or contact
your Bomb Squad representative.
WARNING:
ALWAYS use the RED motor cable with the appropriate internal identification resistor when using RED
Lens Control Motors with third-party motor drivers. Any damage caused to motors or motor drivers resulting from the
use of third-party cables is not covered under warranty.
NOTE:
For more information on compatibility, go to
"Compatible Motor Drivers" on page 61
This section provides information on the following RED Lens Control Motor components:
RED Lens Control Motor
RED Lens Control Motor Mounting Bracket
19mm-to-15mm Rod Reducer Kit
RED Lens Control Motor Gear M 0.8
Figure: RED Lens Control Motor with Lens Control Motor Mounting Bracket
