DISCLAIMER
RED has made every effort to provide clear and accurate information
in this document, which is provided solely for the user’s information.
While thought to be accurate, the information in this document is
provided strictly “as is” and RED will not be held responsible for issues
arising from typographical errors or user’s interpretation of the
language used herein that is different from that intended by RED. All
safety and general information is subject to change as a result of
changes in local, federal or other applicable laws.
RED reserves the right to revise this document and make changes
from time to time in the content hereof without obligation to notify any
person of such revisions or changes. In no event shall RED, its
employees or authorized agents be liable to you for any damages or
losses, direct or indirect, arising from the use of any technical or
operational information contained in this document.
For comments or questions about content in this document, please
send a detailed email to
.
COPYRIGHT NOTICE
COPYRIGHT© 2017 RED.COM, LLC.
All trademarks, trade names, logos, icons, images, written material,
code, and product names used in association with the accompanying
product are the copyrights, trademarks, or other intellectual property
owned and controlled exclusively by RED.COM, LLC. For a
comprehensive list, please see
.
TRADEMARK DISCLAIMER
All other company, brand, and product names are trademarks or
registered trademarks of their respective holders. RED has no
affiliation to, is not associated or sponsored with, and has no express
rights in third- party trademarks. SD and microSD are registered
trademark of SD-3C, LLC in the United States, other countries or
both. Nikon is a registered trademark of Nikon Corporation. Canon is
a registered trademark of Canon, U.S.A. LEMO is a registered
trademark of LEMO USA. Amphenol is a registered trademark of
Amphenol Corporation. Neutrik is a registered trademark of Neutrik
USA Inc. Phillips is a registered trademark of the Phillips Screw
Company in the United States or other countries. Arri is a registered
trademark of Arriflex Corporation. Cooke is a registered trademark of
Cooke Optics Limited. Leica is a registered trademark of Leica
Microsystems IR GmbH. Fujinon is a registered trademark of
FUJIFILM Corporation. Mac is a registered trademark of Apple Inc. in
the U.S. and other countries. Bartech is a registered trademark of
Bartech, Inc. cmotion is a registered trademark of cmotion
Mechatronikentwicklungs- und Handels GmbH.
COMPLIANCE STATEMENTS
INDUSTRIAL CANADA EMISSION COMPLIANCE STATEMENTS
This device complies with Industry Canada license- exempt RSS
standards RSS 139 and RSS 210. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
4
RED 3-AXIS SYSTEM OPERATION GUIDE
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.Cet appareil
numérique de la classe B est conforme à la norme NMB- 003 du
Canada.
FEDERAL COMMUNICATIONS COMMISSION (FCC)
STATEMENTS
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
In order to maintain compliance with FCC regulations, shielded cables
must be used with this equipment. Operation with non- approved
equipment or unshielded cables is likely to result in interference to
radio and TV reception. The user is cautioned that changes and
modifications
made
to
the
equipment
without
approval
of
manufacturer could void the users authority to operate this equipment.
NOTE:
This device complies with Part 15 of the FCC Rules.
Operation is subjected to the following two conditions (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including that may cause undesirable
interference.
CAUTION:
Exposure
to
Radio
Frequency
Radiation.
The device shall be used in such a manner that the potential for
human contact is minimized.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator
and your body.
