ADJUST TORQUE
Keep the torque setting as low as possible to avoid damaging the lens and lens motors. Increase the torque setting if
the motor does not successfully initialize or an error message is displayed.
1. Select one of the following motors in the W.M.D. main menu:
Focus
Iris
Zoom
2. Select
Torque
.
3. Press
Select
to cycle through to a torque setting. (Example:
Low
,
Medium
,
High
)
CHANGE MOTOR DIRECTION
The last direction of the motor persists between reboots.
1. Select one of the following motors in the W.M.D. main menu:
Focus
Iris
Zoom
2. Select
Direction
.
3. Press
Select
to toggle to motor direction.
SELECT MOTOR TYPE/MODEL
1. Select one of the following motors in the W.M.D. main menu:
Focus
Iris
Zoom
2. Select
Model
.
3. Navigate to a motor model.
4. Press
Select
.
NOTE:
For a list of default motor profiles, go to
"3-Axis System Compatibility" on page 61
or the
.
ADJUST BACKLASH
The RED Lens Control Motor offers next to zero backlash when properly installed. However, you may experience
backlash with third-party motors, or certain lens and motor combinations.
The W.M.D. allows you to compensate for any backlash. Select an anti-backlash setting in the range of 0 to 3,000
encoder counts.
1. Select one of the following motors in the W.M.D. main menu:
Focus
Iris
Zoom
2. Select
Backlash
.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
2 7
RED 3-AXIS SYSTEM OPERATION GUIDE
