red lion CUB 1, Руководство пользователя

Страница: 97 / 154

PAXI: PRESCALER OUTPUT ENABLE *
PAXI: PRESCALER SCALE VALUE *
13
!
"
,-'
. /*'
COUNTER A OPERATING MODE
NONE cnt cntud dcntud quAd1 quAd2
quAd4 dquAd1 dquAd2 cnt2 cntud2 dctud2
Select the operating mode for Counter A.
!
"
01!+
.!1%1'
COUNTER A RESET ACTION
When Counter A is reset, it returns to zero or Counter A count load value.
This reset action affects all Counter A resets, except the Setpoint Counter Auto
Reset in Module 6.
!
"
2
.$1/&'
COUNTER A DECIMAL POSITION
This selects the decimal point position for Counter A and any setpoint value
assigned to Counter A. The selection will also affect Counter A scale factor
calculations.
!
"
3422222
.%/5./
COUNTER A SCALE FACTOR
The number of input counts is multiplied by the scale factor and the scale
multiplier to obtain the desired process value. A scale factor of 1.00000 will
result in the display of the actual number of input counts. (Details on scaling
calculations are explained at the end of this section.)
2422223
to
6466666
Adds Input A rising and falling edges if User 1 is
high. Subtracts Input A rising and falling edge if
User 1 is low. Count X2
w/direction dctud2
Adds Input A rising and falling edges if Input B is
high. Subtracts Input A rising and falling edge if
Input B is low. Count X2
w/direction cntud2
Adds Input A rising and falling edges. Count X2 cnt2
Adds Input A rising edge when User 1 is high and
Input A falling edge when User 1 is low. Subtracts
Input A falling edge when User 1 is high and Input A
rising edge when User 1 is low. Quad X2 dquAd2
Adds Input A rising edge when User 1 is high.
Subtracts Input A falling edge when User 1 is high. Quad X1 dquAd1
Adds Input A rising edge when Input B is high, Input
A falling edge when Input B is low, Input B rising
edge when Input A is low, and Input B falling edge
when Input A is high. Subtracts Input A falling edge
when Input B is high, Input A rising edge when Input
B is low, Input B rising edge when Input A is high,
and Input B falling edge when Input A is low. Quad X4 quAd4
Adds Input A rising edge when Input B is high and
Input A falling edge when Input B is low. Subtracts
Input A falling edge when Input B is high and Input
A rising edge when Input B is low. Quad X2
quAd2
Adds Input A rising edge when Input B is high.
Subtracts Input A falling edge when Input B is high. Quad X1 quAd1
Adds Input A falling edge if User 1 is high. Subtracts
Input A falling edge if User 1 is low. Count X1
w/direction dcntud
Adds Input A falling edge if Input B is high.
Subtracts Input A falling edge if Input B is low. Count X1
w/direction cntud
Adds Input A falling edge. Count X1 cnt
Does not count. NONE
DESCRIPTION MODE SELECTION
/*'#$ 01!+
2 2422 242222
242 24222 2422222
!
"
3
.%/.#!
COUNTER A SCALE MULTIPLIER *
The number of input counts is multiplied by the scale multiplier and the scale
factor to obtain the desired process value. A scale multiplier of 1 will result in
only the scale factor affecting the display. (Details on scaling calculations are
explained at the end of this section.)
!
"
722
./*'#$
COUNTER A COUNT LOAD VALUE *
When reset to count load action is selected, Counter A will reset to this value.
!
"
*+
. &89&
COUNTER A RESET POWER-UP *
Counter A may be programmed to reset at each meter power-up.
!
"
*+
&!%1*
!
"
342222
&!:.#
This enables the prescaler output. The prescaler output is useful for
providing a lower frequency scaled pulse train to a PLC or another external
counter. On each falling edge of Input A, the prescaler output register
increments by the prescaler scale value (
&!:.# ). When the register equals or
exceeds 1.0000, a pulse is output and the register is lowered by 1.0000. The
prescaler register is reset to zero whenever Counter A is reset (except for
Setpoint Counter Auto Reset). (See Prescaler Output Figure.)
866666
to
666666
242223
to
342222
The prescaler output frequency is the Input A frequency times the prescaler
scale value.
*
Factory Setting can be used without affecting basic start-up.
3 243 2423
;1% *+
;1% *+