5
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Battery Installation
guideWELD LIVE has two battery packs
that are located on the Speed Board and
on the Helmet. Both locations take two
rechargeable AA batteries.
NOTE:
Each unit is shipped with
rechargeable batteries installed. An
additional four rechargeable batteries
and battery charger are included.
System Battery Life
The bottom right screen on the
guideWELD LIVE Helmet will display the
battery status icons. The bottom left icon
is the helmet battery status and the
bottom middle-left icon is the speed
sensor battery status.
The following is the life expectancy for
each battery pack before recharging:
•
Helmet battery life expectancy: 6.5 hours per continuous use
•
Speed Board battery life expectancy: 8 hours per continuous use
NOTE:
For best usage, if using product on a day-to-day basis, charge overnight to ensure
fully charged batteries with every use.
Speed Shield Cleaning Instructions
Speed Shield:
•
Keeping the shield clear of dust, debris, and other welding partials will give the tracking
sensors the best visual of welding arc
•
Clean the shield after each use for best results; wipe it with a dry cloth
Protective Speed Lens:
•
Keep lens free of dust, debris, and other welding partials
•
Clean lens every 2-3 days of welding use for best results; wipe it with a dry cloth
Helmet batteries
(screwdriver needed)
Speed Sensor Batteries
