20
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Precision Levels
(setup continued)
Change Default Precision Levels
To change the default level, follow the steps below and enter the level each time the Helmet
is used. After turning off the Helmet, it will default back to level 2 for Precision Level.
Precision Levels Instructions:
1. Turn on Helmet and Speed Sensor
2. Go to the Main Menu, select Setup and press the menu select button
3. Select Precision Levels. Press the menu select button
4. Select Set Precision Levels. Press the menu select button
5. Select the level [1, 2, 3, 4] to move precision guides. Press the menu select button
6. Go back to Main Menu to begin weld calibration process
International Specifications
(setup)
Change Measurement Units
To change the default measurement units from Imperial (U.S.) to international specs of
Metric, follow the steps below.
Measurement Units Instructions:
1. Turn on Helmet and Speed Sensor
2. Go to the Main Menu, select Setup and press the menu select button
3. Select International Specifications. Press the menu select button
4. Select Metric/Imperial. Press the menu select button
5. Select Metric or Imperial. Press the menu select button
6. Go back to Main Menu to begin weld calibration process
Change Language
To change the default English language to international specs of Czech or Spanish, follow the
steps below.
Measurement Units Instructions:
1. Turn on Helmet and Speed Sensor
2. Go to the Main Menu, select Setup and press menu select button
3. Select International Specifications. Press the menu select button
4. Select Language. Press the menu select button
5. Select the desired language. Press the menu select button
6. Go back to Main Menu to begin weld calibration process
