19
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Precision Levels
(setup)
Precision Level is the tolerance that is allowed for Work Angle, Travel Angle and Speed to be
in comparison with the WPS. For example, if Work Angle is 45 degrees, precision level would
allow a 45-degree mark miss by 2-3 degrees (42 degrees on the low end, 48 degrees on the
high end) and still be acceptable for the guidance system.
The Precision Levels mode is the area where a user can increase or decrease the precision
of the WPS parameters for the guidance system within the Helmet. All systems are preset at
level 2. See the chart below for exact degrees and speed info.
•
Level 1 is a 3-degree up/down variable for Work & Travel Angle
and 1.5-inch increase in Travel Speed
•
Level 2 is a 5-degree up/down variable for Work & Travel Angle
and 3-inch increase in Travel Speed
•
Level 3 is a 7-degree up/down variable for Work & Travel Angle
and 3-inch increase/decrease in Travel Speed
•
Level 4 is a 10-degree up/down variable for Work & Travel Angle
and 4-inch increase/decrease in Travel Speed
Precision Levels continued on the next page >
