18
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Firmware
(setup continued)
Update Sensor
Update Sensor is used to update the software code on the Speed Sensor.
Update Sensor Instructions:
1. Turn on the Helmet
2. Insert SD Card into the Helmet
3. Go to the Main Menu, select Setup and press the menu select button
4. Select Firmware and press the menu select button
5. Select Update Sensor and press the menu select button
6. Turn off helmet to restart
Update Flash Memory
Flash Memory is the text and graphics on each of the Helmet screens. Update Flash Memory
is used to update the software code.
Update Flash Memory Instructions:
1. Turn on Helmet
2. Insert SD Card into Helmet
3. Go to the Main Menu, select Setup and press the menu select button
4. Select Firmware and press the menu select button
5. Select Update Flash Memory and press the menu select button
6. Turn off the Helmet to restart
NOTE:
Updates will begin and run until complete – do not shut off the Helmet during this
time. When update is complete, screen will state “Update Complete”
NOTE:
Updates will begin and run until complete – do not shut off Helmet during this time.
When updated, screen will state “Update Complete”
