23
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Troubleshooting
Angle Sensor
If the connection between the Helmet and the Angle Sensor is not communicating, it may be
because of the Angle Sensor not being connected to the Helmet.
1. “Connect Hand Sensor” will display in the upper right and left screens
2. The Hand Sensor status icon in the lower right screen will be grayed out
3. Once the Hand Sensor is connected and communicating with the Helmet, the status icon
will turn green (see the right icon below)
NOTE:
Due to the cabling, if the
Angle Sensor male cable
is connected to the
female of the Helmet
too quickly, it may
not join properly.
Due to this issue,
a message in the
Helmet appears
indicating a
reconnect for the
Angle Sensor. There
is a two-click
connection that
should take place, and
this message will
disappear when
done correctly.
1
1
2
