T7 Installation & User Manual
24
10 Power Connectivity
The following chapter will explain how to connect power from the vehicle to the receiver.
Caution:
Before attempting to connect the power for this system,
you must ensure that the vehicle is turned off and that the
positive terminal is disconnected from the battery. Failure to
do so may cause electrical shock, fire or personal injury.
Caution:
Only an RBC certified installer should attempt power cable
connection.
Warning:
The following procedure MUST be completed ONLY
with a digital multi-meter (DMM). Failure to do
so could result in serious injury, damage, airbag
deployment or a short circuit.
Key Note:
As it would be virtually impossible to accommodate all levels
of integration into existing entertainment systems, these
instructions should be viewed as a basic procedural outline.
Your application may require a different approach depending
on existing vehicle accessories.
Warning:
Wires sheathed in brightly colored plastic/PVC, usually
yellow or orange, are indicative of airbag circuits.
Do NOT disturb these wires. If in doubt, consult the
vehicle owners manual.
