Raymarine STV60, Инструкция по установке и эксплуатации

Страница: 45 / 82

45
1. Press YES to enter setup mode.
2. Press NEXT 6 times to enter the Use
DiSEqC 1.2 menu.
3. Press YES to set the use of DiSEqC
1.2.
SETUP MODE ?
SET SAT PAIR ?
USE DISEQC 1.2 ?
YES
PREV
PREV
NO
NEXT
NEXT
YES
YES
X6
Setting the Use of DiSEqC 1.2
If DiSEqC 1.2 protocol is in use on your receiver, enable the
DiSEqC 1.2 setting on the ACU to process the DiSEqC 1.2
command.
4. Set the USE DiSEqC 1.2 to a desired op-
tion* .
PREV - Shows previous option (YES/NO)
SELECT/ENTER - Set the displayed option
for DiSEqC 1.2.
NEXT - Shows next option (YES/NO)
Press ENTER to move to next screen.
5. Press YES to accept the data.
Press NO to cancel and return to main
setup mode.
USE DISEQC 1.2 : NO
NEXT PREV SELECT
SAVE ?
YES NO
Options for ‘USE DiSEqC 1.2’
YES - Select this option if the DiSEqC 1.2 is used.
NO - Select this option if the DiSEqC 1.2 is not used.