Raymarine STV60, Инструкция по установке и эксплуатации, Страница: 37 / 82

37
Edit Satellite Information
It is possible to modify the existing satellite information and input new satellite
information into the ACU as well. However, this mode is not recommended for
novice satellite service users.
1. Press YES to enter setup mode.
2. Press NEXT twice to enter edit satel-
lite info mode.
3. Press YES to edit satellite info.
4. Set the satellite name.
PREV - Shows previous satellite name.
SELECT - Select the displayed satellite
for editing.
NEXT - Shows next satellite name.
Press ENTER to move to next screen.
SET SAT PAIR ?
SAT NAME : DTV101
PREV
PREV
NEXT
NEXT
YES
SELECT
X2
5. Input the satellite name.
+ increases the value. - decreases the value.
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
6. Press ENTER to move to next screen.
Press BACK to return previous screen.
7. Input the satellite position.
+ increases the value. - decreases the value.
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
SAT NAME : DTV101
SAT NAME : DTV101
LONGITUDE 124.00 E
-
-
-
+
+
+
INPUT
INPUT
INPUT
8. Input the tracking frequency (MHz) and sym-
bol rate (KHz) for vertical low band.
VER LOW 12598 21096
- + INPUT
SETUP MODE ?
YES NO
EDIT SAT INFO ?
PREV NEXT YES