Raymarine gS Series Скачать руководство пользователя страница 86

Страница: 86 / 208

Cartography objects

If supported by you cartography type, cartographic objects can be individually switched on and off. The table below show a
list of these objects.

The Objects menu is accessed from:

Menu > Presentation > Objects

Note:

The Objects menu is only available when the cartography in use supports these features.

Object (Menu item)

Description

Options

Show Rocks

Determines the depth at which rocks are displayed in the
chart application.

• 0–6 ft / 0–2 m / 0–1 fa

• 0–18 ft / 0–5 m / 0–3 fa

• 0–30 ft / 0–10 m/ 0–5 fa

• 0–50 ft / 0–15 m / 0–8 fa

• 0–60 ft / 0–20 m / 0–10 fa

• All (default)

Nav. Marks

Determines whether navigation marks are displayed on
the chart:

•

Off

— navigation marks are NOT displayed.

•

— navigation marks are displayed.

• Off

• On (default)

Nav. Mark Symbols

Determines which set of navigation mark symbols is used
— International, or US. These symbols correspond to
paper charts.

• International (default)

• US

Light Sectors

Determines whether the sector of light cast by a fixed
beacon is displayed or not.

•

Off

— sector of light is NOT displayed.

•

— sector of light is displayed.

• Off

• On (default)

Routing Systems

Determines whether routing data is displayed or not.

•

Off

— routing data is NOT displayed.

•

— routing data is displayed.

• Off

• On (default)

Caution Areas

Determines whether caution data is displayed or not.

•

Off

— caution data is NOT displayed.

•

— caution data is displayed.

• OFF

• ON (default)

Marine Features

When this menu item is set to On, the following
water-based cartographic features are displayed:

• Cables.

• Nature of seabed points.

• Tide stations.

• Current stations.

• Port information.

• Off

• On (default)

Land Features

When this menu item is set to On, land-based cartographic
features are displayed.

• Off

• On (default)

Business Services

When this menu item is set to On, symbols indicating the
location of a business will be shown.

• Off

• On (default)

Panoramic Photos

Determines whether panoramic photos are available for
landmarks such as ports and marinas.

• Off

• On (default)

Roads

Determines whether major coastal roads are displayed
on the chart:

•

Off

— coastal roads are NOT displayed.

•

— coastal roads are displayed.

• Off

• On (default)

Additional Wrecks

Determines whether extended information for new wrecks
is displayed.

• Off

• On (default)

Colored Seabed Areas

Provides greater definition of the seabed. This applies
only to limited areas where the extra detail is available.

• Off (default)

• On

172

gS Series

Содержание gS Series

















































































































































































































Результаты поиска

Содержание gS Series

Отзывы:

Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 86 / 208

Результаты поиска

Содержание gS Series

Отзывы: