Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 155 / 208

Data Category Description Data Item Data application Graphics
TWA & TWS
TWA (CH) and TWS
TWA and VMG
GWD and Beaufort
GWD & GWS
None
Note: *Dials and graphical representations are only available from the Data application. Databar and data cell overlays can only
display digital items.
Note: **The Battery, Engine, Fuel and Tanks menus will display 1 set of data items per configured device (e.g. if the system has
been configured with 3 engines then 3 sets of engine data items will be displayed).
19.5 Resetting minimum and maximum
readings
Minimum and maximum readings sorted on the display can be
reset from the Data application.
From the Data application, with the data you want to reset
displayed onscreen:
1. Select Menu .
2. Select Data Resets .
3. Select the data item you want to reset.
The reading is reset.
Note: Resets will only be available for data items that are
currently displayed onscreen.
19.6 Resetting all datapages
You can reset the datapages in the data application to the
factory defaults.
1. Select Menu .
2. Select Reset All Pages .
The confirm reset pop up message is displayed.
3. Select Yes to reset or No to cancel the action.
Note: Resetting all pages will restore your pre-configured
pages to default settings and remove any custom pages that
have been created. Number of engines and maximum RPM
settings will not be changed during the reset.
Data application
241