Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 50 / 208

14.13 AIS alarms
The AIS functions generate a number of alarms to alert you to
dangerous or lost targets.
In addition to the dangerous target alarm, the system generates
an alarm when a dangerous target becomes a lost target i.e. its
signal has not been received for 20 seconds.
Your AIS receiver generates local alarms which are displayed
and sounded on your multifunction display whenever an alarm
condition exists on the unit.
Local AIS alarms
When the connected AIS unit generates an alarm, your
multifunction display shows a local alarm message and indicates
the alarm status in the status bar.
Active AIS alarms log
The active alarm log shows the status of each local alarm. This
log can be accessed as follows:
• from the Chart application when only the AIS overlay is
enabled by going to: Menu > AIS Options > AIS Set-up >
AIS Alarms Log
• from the Chart application when the Radar overlay is also
enabled by going to: Menu > Radar & AIS Options > Targets
> AIS Set-up > AIS Alarms Log
• from the Radar application by going to Menu > Targets > AIS
Set-up > AIS Alarms Log .
Acknowledging AIS alarms
In the chart or radar application:
1. Select Ok on the alarm dialog box.
Note: An AIS alarm remains active until it is acknowledged
on your multifunction display.
14.14 Buddy tracking
The Buddy Tracking feature enables you to add AIS-equipped
friends and regular contacts to a “Buddy List” on your
multifunction display. As soon as a vessel on your Buddy List
sails into the range of your AIS unit, the vessel icon changes to
indicate this.
1
2
3
4
D 12221-1
Item Description
1 Buddy icon
2 Dangerous target icon
3
Own vessel icon
4 Normal AIS icon
How it works
When the AIS Layer is enabled in the chart or radar application,
AIS targets are shown on your display. You can add any AIS
target to a “Buddy List”, each entry consisting of an MMSI
number, and an optional name. Subsequently, whenever Buddy
Tracking is enabled on your multifunction display, and a “Buddy”
vessel with an MMSI number sails into the range of your AIS
receiver, an AIS Buddy icon is displayed. Up to 100 vessels
may be added to the Buddy List.
Pre-requisites
The following items are required for the Buddy Tracking feature:
• For the purposes of using the Buddy Tracking feature, it is
assumed that your display is already connected to a suitable
AIS unit.
• Only transmitting AIS-equipped vessels will be detected.
Enabling and disabling buddy tracking in the
Chart application
From the Chart application, with the AIS overlay enabled:
1. Select
Menu .
2. Select AIS Options or *Radar & AIS Options .
3. Select Targets .
4. Select Display buddies .
Selecting Display buddies will switch the buddy tracking
feature On and Off.
Note:
*When Radar overlay is also enabled the menu name
becomes
Radar & AIS Options .
Enabling and disabling buddy tracking in the
radar application
From the radar application, with AIS enabled:
1. Select
Menu .
2. Select Targets .
3. Select Display buddies .
Selecting Display buddies will switch the buddy tracking
feature On and Off.
Adding a vessel to your buddy list
In the chart or radar application:
136
gS Series