Raymarine gS Series Скачать руководство пользователя страница 180

Страница: 180 / 208

27.8 System set-up menus

The system set-up menus enable you to configure your display and connected external devices.

The following menus are available:

Menu item

Description

Notes

Touch-Lock

Enables you to lock the touchscreen of a touch only
display when the display is paired with a remote keypad.

Note:

This option is not available on touch-only

displays which do not have a remote keypad
connected.

Note:

This option is not available on displays which

have physical buttons.

• ON

• OFF (default)

Alarms

Enables you to configure all the different types of alarms
produced by the display and connected equipment.

Fuel Manager

Displays the Fuel manager page

Pilot Controls

Displays the Pilot Control dialog.

Only available when a Raymarine autopilot is detected
on the system and

Autopilot Control

is set to On.

Pilot Response

Enables selection of the pilot response level when
connected to an Evolution autopilot.

Note:

Pilot Response is not available on SPX and

SeaTalk autopilots.

• Leisure

• Cruise

• Performance

Audio Controls

Displays the audio controls pop-up.

Note:

Not available on non-touch displays.

Only available when connected to an audio device via
bluetooth.

Ground Trip Resets

Resets the chosen ground trip distance counter to zero.

System Settings

Enables you to configure the settings for external
devices connected to the display.

Maintenance

Provides diagnostic information. Also enables you to
designate the data master and reset the display to
factory settings.

314

gS Series

Содержание gS Series

















































































































































































































Результаты поиска

Содержание gS Series

Отзывы:

Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 180 / 208

Результаты поиска

Содержание gS Series

Отзывы: