Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 77 / 208

True Motion
D 12304-1
When the motion mode is set to True Motion, the chart is fixed
and the vessel moves in true perspective to fixed landmasses
on-screen. As the vessel’s position approaches the edge of the
screen, the chart picture is automatically reset to reveal the area
ahead of the vessel.
Note: It is not possible to select True Motion when the
orientation is set to Head Up.
Auto Range
D 12305-1
Auto Range selects and maintains the largest possible scale of
chart that will display both the vessel and the target waypoint.
Auto range is not available if radar-chart synchronization is on.
Setting the motion mode
To change the motion mode follow the steps below.
From the chart application menu:
1. Select Presentation .
2. Select View & Motion .
3. Select Motion Mode: .
4. Select True Motion, Relative Motion, or Auto Range option
as appropriate.
Once selected the screen will update to reflect the new mode.
Changing the position of the boat icon
From the chart application menu:
1. Select Presentation .
2. Select View & Motion .
3. Select Boat Position .
4. Select Center , Partial Offset , or Full Offset as appropriate.
16.9 Chart views
If supported by your cartography type, the Chart application can
be set to either 2D or 3D view.
Selecting 2D and 3D chart views
You can switch between 2D and 3D views in the chart application
if supported by your cartography.
From the chart application menu:
1. Select
Presentation .
2. Select View & Motion .
3. Select Chart View to select 2D or 3D.
2D chart view
The 2D chart view can display a range of information to help
you navigate.
D12306-3
1 2 3 6 7 4 5
1 4 1 5 1 6 1 3
8
1 1
9
1 0
1 2
Item Description
1 Range — horizontal chart scale indicator (shown in selected
system units).
2 Waypoint — inactive.
3 Orientation — states the orientation mode that the chart is
using (North-up, Head-up, or Course-up).
4 Vessel symbol — shows your current position.
5 Navigation origin line — during navigation, shows a solid
line from the starting point to the target waypoint. The starting
point can be the vessel’s original location, the point of XTE
reset or the point the current leg of a route was initiated.
6 Motion mode — states the current motion mode (Relative,
True, or Auto Range).
7
Chart type — indicates the type of chart in use — Fish or
Navigation.
8 Find ship icon — used to find and center your vessel on
the chart.
9 Vessel position line — during navigation, shows a dotted line
from the vessel’s current position to the target waypoint.
10 Cursor — used to select chart objects and move around the
chart area.
11 Target waypoint — current target waypoint.
12 Databoxes — used to display data such as depth on the chart
screen.
13 AIS target — a vessel broadcasting AIS information (optional).
14
Range out — select icon to range out (Touchscreen displays
only).
15 Range in — select icon to range in (Touchscreen displays
only).
16 Cartographic objects — level of cartographic objects is
determined by the cartography type.
Chart application
163