Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 19 / 208

ii. The onscreen Up and Down arrows — Touchscreen
displays.
3. To access the on-screen numeric keypad:
• Touch operation — Select the onscreen keypad icon from
the numeric adjust control.
• Non-Touch operation — Press and hold the Ok button.
The onscreen numeric keypad is displayed.
4. Enter the required value.
5. Select Ok to exit the numeric keypad and return to the menu.
Using slider bar controls
Slider bar controls provide a graphical representation of numeric
data and enables you to quickly change setting values.
1
2
3
D12570-1
Item
Descrip-
tion Non—Touch
operation
Touch operation
1 Current
value N/A N/A
2 Slider
control Use the Rotary control
to adjust value
Slide the slider Up or
Down to adjust value.
3 Auto Press Ok button
to switch between
Auto and manual
adjustment.
Select to switch
between Auto and
manual adjustment.
Using control dialogs
Control dialogs enable you to control externally connected
equipment, such as an autopilot unit.
The following diagram shows the main features of a typical
control dialog:
D12279-2
1
3
2
Screen item Description
1 Status — provides status information for the connected
equipment. For example, the Pilot Control dialog
displays the locked heading and current navigation
mode for a connected autopilot unit.
2 Control icons — provide direct control of the
connected equipment. For example, the Pilot Control
dialog
Standby and Track icons enable you to instruct
a connected autopilot unit to perform specific functions.
3
Close — Closes the control dialog.
6.8 Basic touchscreen operations
Placing and moving the cursor using
touch
To place or move the cursor around the screen on a touchscreen
multifunction display follow the steps below.
1. Touch the screen at any position on the screen to place the
cursor there.
Touchscreen lock
On a multifunction display with HybridTouch you can lock the
touchscreen to prevent accidental use.
For example, locking the touchscreen is particularly useful in
rough water or weather conditions.
The touchscreen can be locked and unlocked from the
homescreen. The touchscreen can only be unlocked using
physical buttons.
Locking the touchscreen - touch only displays
When a touch only display is paired with an optional remote
keypad the touchscreen can be locked.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that On is highlighted.
The touchscreen is now locked.
Unlocking the touchscreen - touch only displays
To unlock the touchscreen of a touch only display when paired
with a remote keypad follow the steps below.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that Off is highlighted.
The touchscreen is now unlocked.
Getting started
79