Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 171 / 208

Shared brightness
You can set up shared brightness groups to adjust the brightness
on multiple units simultaneously.
The following units are compatible with shared brightness
groups:
• New a Series
• New c Series.
• New e Series.
• gS Series
• i50
• i60
• i70
• p70 / p70R pilot controllers
• ST70
• ST70+
Once compatible units are added to a shared brightness group,
any brightness adjustment made to any of the units in the group
is also reflected in all other units in that group. An on-screen
single brightness control is available for controlling any units
in the brightness group:
Multiple brightness groups can be configured. This can reflect
the physical location of the units on your vessel if required. For
example, the units at your helm can be set to one group, and
the units on the flybridge can be set to a different group. In this
example, any brightness adjustments made to a unit at the helm
would be automatically reflected in the other units at the helm
but not on the flybridge.
The shared brightness function requires the following:
• All units must be compatible with the shared brightness
function (see list of compatible units above).
• Before a unit can respond to a shared brightness adjustment it
must be assigned to the relevant Brightness Group .
• A single unit can only belong to one brightness group at any
one time.
• The Share brightness setting must be set to On for all units
in the brightness group.
• When setting up a brightness group an initial Sync brightness
operation must be performed, with all the displays in that
group powered on, to configure the display brightness of all
units in the group.
Setting up shared brightness
With the homescreen displayed:
1. Select Customize .
2. Select Display Preferences .
3. Select Shared Brightness .
4. Select the On option for the Shared brightness menu item.
5. Select Brightness Group .
6. Select an appropriate brightness group.
7. Repeat the process for the other displays you want in the
brightness group. If the display is not a multifunction display,
refer to the documentation that accompanies the unit for
instructions on setting-up shared brightness.
8. Once all required displays have been added to the
same brightness group, select Sync Brightness on the
multifunction display.
A shared brightness message is displayed.
9. Ensure all displays in the brightness group are powered on.
10. Select Sync .
When completed a message is displayed confirming that
shared brightness has been configured.
Once shared brightness has been successfully configured,
changing the brightness of any display in that brightness group
will automatically change the brightness of all displays in that
group.
Customizing your display
305