Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 79 / 208

2. Select View & Motion .
3. Select 3D Display Options .
4. Select Transducer Cone so that On is highlighted.
Selecting Transducer cone will switch the function on and off.
Enabling depth scale
In 3D view, to enable a depth indicator at your vessel’s location
follow the steps below.
From the Chart application menu:
1. Select Presentation .
2. Select View & Motion .
3. Select 3D Display Options .
4. Select Depth Scale: so that On is highlighted.
Selecting depth scale will switch depth indicator on and off.
16.10 Chart display
The Chart Display menu option determines the level of detail
that is displayed on-screen.
The Chart display menu option is only available when using
vector based cartography.
The Chart display options are shown below.
Simple
Detailed
Extra Detailed
The level of detail shown on-screen is also affected by the
cartography
Chart detail settings. Refer to Chart detail for
information.
Changing the chart display detail
From the Chart application menu:
1. Select Presentation .
2. Select Chart Detail .
The following options are available:
• Simple
• Detailed
• Extra Detailed
3. Select the required option.
Chart application
165