Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 55 / 208

• Slew thermal camera (only available when thermal camera
is connected and operating.)
For active waypoints the following menu items are available:
• Stop Goto
• Restart XTE
• Advance Waypoint
• Measure
• Build Route
• Acquire Target (only available if Radar overlay is switched
on.)
• Slew thermal camera (only available when thermal camera
is connected and operating.)
Accessing the context menu
You can access the context menu by following the steps below.
1. Non-touchscreen and HybridTouch displays:
i. Selecting a location, object or target on-screen and
pressing the
Ok button.
2. HybridTouch and Touch only displays:
i. Selecting an object or target on-screen.
ii. Selecting and holding on a location on-screen.
Waypoint placement
Placing a waypoint
You can place a waypoint on a multifunction display with a
touchscreen by following the steps below.
D 11763-2
From the chart, radar or fishfinder application:
1. Select and hold the required location on screen.
The context menu is displayed.
2. Select Place Waypoint .
The Waypoint Saved dialog is displayed.
3. Select the Symbol field to change the symbol that will
be used to display the waypoint in the Chart or Radar
application.
4. Select the Name field to change the name of the waypoint.
5. Select the Group field to change the group that the waypoint
is assigned to.
6. Select OK to confirm the waypoint details.
Note: If there is no user interaction with the Waypoint saved
dialog for approximately 5 seconds then the waypoint is saved
with the default settings and the dialog is closed automatically.
Placing a waypoint
From the chart, radar or fishfinder application:
1. Position the cursor at the required position.
2. Press the WPT button.
The context menu is displayed.
3. Select Place Waypoint .
The Waypoint Saved dialog is displayed.
4. Select the Symbol field to change the symbol that will
be used to display the waypoint in the Chart or Radar
application.
5. Select the Name field to change the name of the waypoint.
6. Select the Group field to change the group that the waypoint
is assigned to.
7. Select OK to confirm the waypoint details.
Note: If there is no user interaction with the Waypoint saved
dialog for approximately 5 seconds then the waypoint is saved
with the default settings and the dialog is closed automatically.
Placing a waypoint at your vessel's position
In addition to positional information, a waypoint placed at the
vessel position will capture temperature and sounded depth
information (if you have the appropriate sensors connected to
your system).
From the chart, radar or fishfinder application:
1. Select WPT .
The waypoint menu is displayed.
2. Select WPT again or select Place Waypoint At Vessel from
the menu.
The Waypoint Saved dialog is displayed.
3. Select the Symbol field to change the symbol that will
be used to display the waypoint in the Chart or Radar
application.
4. Select the Name field to change the name of the waypoint.
5. Select the Group field to change the group that the waypoint
is assigned to.
6. Select OK to confirm the waypoint details.
Note: If there is no user interaction with the Waypoint saved
dialog for approximately 5 seconds then the waypoint is saved
with the default settings and the dialog is closed automatically.
Waypoints, Routes and Tracks
141