Raven SmarTrax Скачать руководство пользователя страница 59

Страница: 59 / 59

Raven Industries will not assume any expense or liability for repairs

made outside our facilities without written consent. Raven Industries

is not responsible for damage to any associated equipment or

products and will not be liable for loss of profit or other special

damages. The obligation of this warranty is in lieu of all other

warranties, expressed or implied, and no person or organization is

authorized to assume any liability for Raven Industries.

Damages caused by normal wear and tear, misuse, abuse, neglect,

accident, or improper installation and maintenance are not covered

by this warranty.

What Does this Warranty Cover?

How Long is the Coverage Period?

How Can I Get Service?

What Will Raven Industries Do?

What is not Covered by this Warranty?

Bring the defective part and proof of purchase to your Raven dealer.

If your dealer agrees with the warranty claim, the dealer will send the

part and proof of purchase to their distributor or to Raven Industries

for final approval.

Upon confirmation of the warranty claim, Raven Industries will, at our

discretion, repair or replace the defective part and pay for return

freight.

RAVEN INDUSTRIES

Limited Warranty

This warranty covers all defects in workmanship or materials in your

Raven Applied Technology Division product under normal use,

maintenance, and service.

Raven Applied Technology Division products are covered by this

warranty for 12 months after the date of purchase. This warranty

coverage applies only to the original owner and is nontransferable.

Содержание SmarTrax



























































Результаты поиска

Содержание SmarTrax

Отзывы:

Похожие инструкции для SmarTrax

Бренды по названию

Популярные бренды

Raven SmarTrax, Руководство по установке

Результаты поиска

Содержание SmarTrax

Отзывы:

Похожие инструкции для SmarTrax

Бренды по названию

Популярные бренды