Raven SmarTrax, Руководство по установке

Страница: 20 / 59

Chapter 3
16 John Deere 7X00/7X10 Series SmarTrax™ Installation Manual
FIGURE 4.
Part B Universal Mounting Bracket Installed
Note:
The part B universal mounting bracket (P/N 107-0171-578) should be oriented (with the U ends of
the bracket pointing away from the machine) as shown in Figure 4 above when installed.
3.
Align the hole along the bottom of the universal mounting bracket with the existing hole in the machine’s
right frame rail.
4.
Using the universal mounting bracket as a guide, drill an additional 5/8” hole in the frame rail on the
opposite end of the bracket.
5.
Install the universal mounting bracket on the frame rail using two 5/8”-11 UNC x 1-1/2” hex bolts (P/N 311-
0060-087), two 5/8” flat washers (P/N 313-2300-132), and two 5/8”-11 nylon insert lock nuts (P/N 312-4000-
069).
Install the Left and Right Steering Hoses
Note:
Loosely install the connections to the bulkhead fittings. Do not tighten the connections until
instructed to do so.
FIGURE 5.
Machine’s Left and Right Steering Hoses
Left Rear
Tire
Left
Bulkhead
Fitting
Right
Bulkhead
Fitting
Machine’s
Frame