Raven SCS 700, Инструкция по установке и обслуживанию

Страница: 13 / 72

9
CONSOLE FEATURES
IMPORTANT: This Console requires selection of US (acres), SI [hectares], or TU {1,000 sq.
ft.} area; and SP1 (wheel drive, etc.) or SP2 (radar) speed sensor; C-Sd
(Standard Valve), C-F (Fast Valve), or C-FC (Fast Close valve).
Selects OFF, MANual, or fully
AUTOmatic control.
Console Program can be determined by the letter
stamped in PGM box on label.
Console Revision can be determined by the letter
stamped in REV box on label.
Booms can be controlled individually, or
all at once with MASTER ON/OFF switch.
Manual override control provides
capability for spot spraying.
ENTER -Used only to enter data into the
Console.
Displays function and calibration data. Displays the actual rate of the application.
CE -Use like the CE key on a calculator.
CALIBRATION KEYS
Used to enter data into the Console to calibrate the system.
BOOM CAL -- Length of Boom. Select boom number
by using the UP/DOWN arrrow keys
SPEED CAL -- Determined by Speed Sensor
METER 1 CAL -- Injection Pump 1 Calibration Number
METER 2 CAL -- Injection Pump 2 Calibration Number
VALVE 1 CAL -- Injection Pump 1 Response Time
VALVE 2 CAL -- Injection Pump 2 Response Time
PROD 1 CAL -- Target Application Rate
PROD 2 CAL -- Target Application Rate
SELF TEST -- Simulates Vehicle Speed
POWER -Turns Console OFF or ON.
Turning Console OFF does not affect
data stored.
FUNCTION KEYS
Used to Display Data
TOTAL AREA -- Total Area Applied
FIELD AREA -- Field Area Applied
PROD 1 VOLUME -- Prod 1 Volume Applied to Field
PROD 2 VOLUME -- Prod 2 Volume Applied to Field
DISTANCE -- Distance Traveled
SPEED -- Speed of Vehicle
VOLUME TANK 1 -- Volume Remaining in Prod 1
Injection Module Tank
VOLUME TANK 2 -- Volume Remaining in Prod 2
Injection Module Tank
DATA MENU -- Various data options
063-XXXX-XXX