![background image](http://html.mh-extra.com/html/raven/scs-460/scs-460_operators-manual_788837016.webp)
13
5.
CALCULATING "RATE 1 AND RATE 2 CAL"
Determine the application rate at which chemical is to be sprayed. Consult with
a dealer to ensure these spray nozzles are capable of applying at this rate. In
determining which spray nozzles to use with the sprayer the following must be
known:
1) Nominal Application Pressure
___ PSI [kpa]
2) Target Application Rate
___ GPA [lit/ha]
3) Target Speed
___ MPH [km/h]
4) Nozzle Spacing
___ inches [cm]
From this information, calculate the volume per minute, per nozzle as follows:
GPM [lit/min] = GPA [lit/ha] x MPH [km/h] x inches [cm]
5,940 [60,000]
EXAMPLE:
1)
Application Pressure
= 30 PSI
2)
Target Application Rate
= 20 GPA
3)
Target Speed
= 5.2 MPH
4)
Nozzle Spacing
= 20 inches
GPM = 20 GPA x 5.2 MPH x 20 inches = .35
5,940
Using GPM .35 and pressure 30 select tip number XR8004 from the chart below, since it
comes closest to providing the desired output.
VERIFYING FLOW RATE LIMITS:
The flow rate of spraying must be within the range of that specified for the Flow
Meter included.
FLOW METER MODEL
FLOW RANGE
RFM 5
0.05-5 GPM [0.2-18.9 lit/min]
RFM 15
0.3-15 GPM [1.1-56.8 lit/min]
RFM 60P
1-60 GPM [3.8-210 lit/min]
RFM 100
3-100 GPM [11.4-380 lit/min]
RFM 200/200 Poly
15-200 GPM [56.8-760 lit/min]
RFM 400
25-400 GPM [94.6-1515 lit/min]
Содержание SCS 460
Страница 1: ...SCS 460 Spra Coupe Spra Controller Operator s Manual P N 016 0159 865 Rev A 09 15 Copyright 2009 2015 ...
Страница 3: ......
Страница 45: ......
Страница 46: ......