14
CONSOLE PROGRAMMING
When entering data into the Console, the entry sequence is always the same.
NOTE: DATA MUST BE ENTERED FOR ALL BOOMS. ENTER "0" IF BOOM IS NOT USED.
DATA MUST ALSO BE ENTERED IN KEYS 3 THRU 8.
Depress the key in which
you wish to enter data.
Depress the ENTER key. An
"E" will illuminate in the
display.
Depress the keys correspond-
ing to the number you wish to
enter (i.e. "2","1","2", "3").
The numbers will be displayed
as they are entered.
Complete the entry by again
depressing the ENTER key.
1.
INITIAL CONSOLE PROGRAMMING
When Console power is turned on, after all installation procedures have been
completed, the Console will flash
CAL
and
US VOLUME PER ACRE
. This means
the console must be "calibrated", or programmed, before it can be operated. This
is a one-time operation which does not have to be repeated. Turning OFF the POWER
ON/OFF switch does not affect the Console memory. All data is retained.
Содержание SCS 460
Страница 1: ...SCS 460 Spra Coupe Spra Controller Operator s Manual P N 016 0159 865 Rev A 09 15 Copyright 2009 2015 ...
Страница 3: ......
Страница 45: ......
Страница 46: ......