Raven RoGator 64 Series, Руководство по установке

Страница: 58 / 80

C
HAPTER
5
54 RoGator 64/74/86/SS Series AutoBoom Installation Manual
Install the Pressure and Tank Hoses
FIGURE 4. Machine’s Pressure and Tank Lines
1. Disconnect the pressure hose from the bottom of the machine’s hydraulic valve.
2. Install a 3/4” JIC M/M/F swivel run tee fitting (P/N 333-0012-039) in the open pressure port.
3. Connect the machine’s pressure hose to opposite end of the installed tee fitting.
4. Install the supplied hydraulic hose (P/N 214-1000-296) on the 90° end of the installed tee fitting.
5. Connect the other end of the installed hydraulic hose to the fitting installed in port P on the AutoBoom valve
(P/N 063-0131-127).
6. Disconnect the tank hose from the machine’s hydraulic valve.
7. Install a 9/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-043) in the open tank port.
8. Connect the machine’s tank hose to the opposite end of the installed tee fitting.
9. Install the supplied hydraulic hose (P/N 214-1000-297) on the 90° end of the installed tee fitting.
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic fluid
within the machine’s system may be extremely
hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material or contaminants from being
introduced into the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
Pressure
Tank