Raven RoGator 64 Series, Руководство по установке

Страница: 18 / 80

C
HAPTER
3
14 RoGator 64/74/86/SS Series AutoBoom Installation Manual
1. Secure the AutoBoom valve (P/N 063-0131-127) to the mounting plate (P/N 107-0171-619) using four 5/16”-18 x
7/8” hex bolts (P/N 311-0052-104) and four 5/16” lock washers (P/N 313-1000-019).
NOTE: Some models may offer a mounting plate from the factory (shown in the figure below). If this plate is
present, mount the AutoBoom valve to this plate, using the supplied mounting plate as a pattern to
drill holes.
FIGURE 3. AutoBoom Valve Mounted to the Center Rack
2. Secure the mounting plate to the left side of the machine’s center rack using two 2-9/16” W x 3-1/2” L x 3/8”
thread U-bolts (P/N 107-0171-616) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
INSTALL THE PRESSURE AND TANK
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic fluid
within the machine’s system may be extremely
hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material or contaminants from being
introduced into the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
AutoBoom Valve