Raven RoGator 64 Series, Руководство по установке

Страница: 19 / 80

3
Manual No. 016-0230-044 Rev. F 15
POWERGLIDE
FIGURE 4. Machine’s Pressure and Tank Lines
1. Disconnect the pressure hose from the bottom of the machine’s hydraulic valve.
2. Install a 3/4” JIC M/M/F swivel run tee fitting (P/N 333-0012-039) in the open pressure port.
3. Connect the machine’s pressure hose to opposite end of the installed tee fitting.
4. Install the supplied hydraulic hose (P/N 214-1000-296) on the 90° end of the installed tee fitting.
5. Connect the other end of the installed hydraulic hose to the fitting installed in port P on the AutoBoom valve
(P/N 063-0131-127).
6. Disconnect the tank hose from the machine’s hydraulic valve.
7. Install a 9/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-043) in the open tank port.
8. Connect the machine’s tank hose to the opposite end of the installed tee fitting.
9. Install the supplied hydraulic hose (P/N 214-1000-297) on the 90° end of the installed tee fitting.
10. Connect the other end of the installed hydraulic hose to the fitting installed in Port T of the AutoBoom valve.
INSTALL THE LEFT AND RIGHT CYLINDER HOSES
FIGURE 5. Cylinder Hoses Installed
1. Disconnect the left up hose from the machine’s hydraulic valve.
2. Install 1-1/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-109) in the open left up port of the machine’s
hydraulic valve.
3. Connect the machine’s left up hose to the opposite end of the installed tee fitting.
4. Install the 1-1/16” end of the supplied hydraulic hose (P/N 214-1000-298) on the 90° end of the installed tee
fitting.
Pressure
Tank