Retractable Flap Barrier Operation Manual
18
- -
1 Entering and exiting menu settings
The basic method for entering and exiting the menu while the system is running
(LED is shown as 'RUNX') is (button and display digital tube position Figure A-
1):
1)
Press SET to enter the menu function setting status and display ‘P00’
2)
Press the INC key to increase the system function number to the desired function
number (the system function number is incremented by 1 each time the INC key is
pressed)
3)
Press SET to enter the parameter/function setting status.
4)
Press the INC or DEC key to set the parameter (INC increments the parameter
value by 1, and decrements the parameter value by 1)
5)
Press SET to save the setting value and return to the menu function setting
mode.
6)
Press the DEC button to return the system to P00
7)
Press SET to exit the menu setting, enter the program running status, and
display the word 'RUNX'
Note: RUNX X is the working mode of the device.
2 Menu function, setting
The following menus are unique to the main control board:
LP01: System working status
Enter the menu setting item. When the display shows ‘LP01’, press SET to enter.
There are 2 operating states: 000: test mode; 001: Normally closed state
LP02: Equipment working mode
●
When the display shows
‘
LP 0 2
’
, press SET to enter, and the following
