Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 75 / 102

Spreading operation using the QUANTRON-K2 Control unit
69
5
5.2 Adjusting the spreading width during spreading operation
The various settings for the spreading width limiter allow spreading widths of 1 m
to 10 m at a mounting height of approx. 55 cm (see operating manual for the
AXEO winter spreader).
Depending on the equipment of your machine, various spreading width configu-
rations are available.
5.2.1 Winter service spreader with one actuator for the spreading width limiter
Without lever (Dispersion AUTO deactivated)
By default, the actuator for the spreading width limiter is installed on the right side
(in the direction of travel). See
4.6.4: Levers (option), page 47 .
Figure 5.2: Spreading width adjustment with one actuator

To actuate the right spreading width limiter plates, press the F1 or F2 function
key.
-
F1 [1]: Lowering the right spreading width limiter plates
- F2 [2]: Raising the right spreading width limiter plates
n
CAUTION
Environmental damage due to incorrect machine settings
When the Dispersion AUTO function is deactivated, the disc
speed and position of the spreading width limiter plates are not
automatically adjusted to the reduced spreading width. There is
a risk of environmental damage due to incorrect configurations.
 Adjust the RPM of the spreading disc / the position of the
dispersion limiter plates at the operating screen with the F1
and F2 function keys. The symbols can be accessed by
pressing the L/R key repeatedly.
 Only deactivate the Dispersion AUTO when absolutely nec-
essary.
1 2