Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 37 / 102

Operation QUANTRON-K2
31
4
4.5.1 Spreading density
In the Spreading density submenu, you can enter the desired spreading density
for the spreading material to be spread.
1. Call up the Spreading mat. settings > Spreading density submenu.
 The display shows the currently applied spreading density.
2. Enter the new value in the input field using the arrow keys :
See also 4.11.2: Input of values using the cursor keys, page 65 .
3. Confirm input by pressing the Enter key .
 The new value is saved in the control unit.
 The display shows the Spreading mat. settings menu.
Spreading material (characteristics) Spreading density (g/m
2
)
Salt, coarse/fine (damp) 5-40
Sand, grit (blunting) 75-300
Fertiliser 1-300
NOTICE
The programmed ranges are orientation values only . The spreading density
can be adapted to individual requirements.
If a value outside the range is entered, an alarm message is displayed.

Press the C/100% key: the entered value is saved.